Шинний модуль CEAG DLS3PH-BUS-Modul Inv RS485
The DLS/3PH bus module can be used as a phase monitor and for light switch polling for the common switching of safety and general lighting systems. Switch cables to the safety luminaires are not required. The housing is suitable for DIN rail mounting. The module has a service button, an RS 485 bus port (integral 120 Ohm bus load resistor) with 24 V module supply, and is addressed with encoding switches. Coloured LEDs indicate fault, ON status and operation. Freely programmable assignment of independent DLS inputs per emergency light circuit or luminaire and individual name per bus module in control unit. With use a 3-phase monitor, detailed phase failure display with location of failed sub-distribution for general lighting via clear text display in control unit.
Supply voltage device 24 V DC (min. 19 V, max. 30 V) Current consumption (all 8 channel connected) 20 mA ± 5 mA Degree of protection IP20 Insulation class I Ambient temperature -10 °C to +40 °C Input channels 8, DLS (channel 1-8) or DLS (channel 1-5) and 3Ph (channel 6-8) UN = 230 V, > 195 V -> ON < 138 V -> OFF, > 195 V -> ON < 138 V -> OFF Number of light switch inputs 8 pcs. with LED display or 5 pcs. with 3-phase-monitor (selector) Monitoring threshold 60 – 85 % UNom meets DIN VDE 0100-718) Data bus RS 485 Address range 1-25 Weight 0.2 kg Dimensions (L x W x H) mm 105 x 85 x 60 Mounting DIN-rail Connection terminals/plug-in terminals 2.5 mm² rigid and flexible